Regarding the problem of abnormal power loss of Yuan Plus, it mainly involves the calibration of lithium iron phosphate batteries. Therefore, how to calibrate the battery power and restore it to normal is the key to solving the problem of abnormal power loss. The following is an idea for calibrating the battery for your reference:
1、Consumption of the vehicle’s power is below 10%, then insert the charging gun into the vehicle to start the charging process.
2、Turn on the vehicle’s air conditioning and set the temperature to the hottest setting. Keep the air conditioner working until the vehicle’s APP shows that the battery level is 0%.
3、Turn off the air conditioner and continue charging until the battery reaches 100%. In order to protect the battery, it is not recommended to completely deplete the battery, so the actual battery capacity displayed by the charging station shall prevail. As long as the power displayed on the charging pile is above 59 kilowatts, it can be confirmed that the battery has been fully discharged and the battery calibration has been successful.
In addition, after charging is completed in winter, the charging gun should be pulled out as soon as possible and the vehicle started to avoid damage to the small battery due to power consumption.
This calibration method is suitable for situations where there is a large power loss problem and the battery is recharged after the battery is lower than 20%. It can solve the problem of large power calculation error.
It is worth noting that virtually all pure electric vehicles from major automakers retain a portion of their power to protect the battery and solve the problem of moving the vehicle when the battery is extremely low. Therefore, do not drain the battery unless absolutely necessary. In addition, this extreme charging operation should be avoided as much as possible, especially for personal vehicles rather than test vehicles.
Power consumption reaches 0%
Start slow charging
Slow charging power is less than 7kw
Actual charging 59.45kw
It takes 8 hours and 50 minutes to charge from 0% to 100%
Dynamic battery life, mileage is displayed when turning on the air conditioner
Dynamic battery life, the mileage is displayed on the meter after turning off the air conditioner
After leaving it overnight, the mobile APP displays the remaining mileage.